广州某超高层建筑的加层结构设计 - 昆明理工大学学报.pdfVIP

  • 1
  • 0
  • 约5.41千字
  • 约 4页
  • 2017-09-03 发布于天津
  • 举报

广州某超高层建筑的加层结构设计 - 昆明理工大学学报.pdf

广州某超高层建筑的加层结构设计 - 昆明理工大学学报

29 6 ( ) Vol. 29 No6 2004 12 Journal of Kunming University of Science and Technology (Science andTechnology) Dec. 2004 凌育洪 ( , 510641) : 中诚广场原设计为地面以上46 层的超高层建筑, 当主体结构施工至36 层时, 由于使用 能调整的要求, 总层数需增加至51层, 加层后建筑物总高度增加至185m.通过对原结构设计方 案及其使用的结构分析软件的不完善之处的分析研究, 结合对现行规范条文的正确理解,采取了 对37层以上的梁和柱截面进行调整在51层设置预应力大梁将48 层以上的楼面荷载传至核心 筒等结构措施, 提出了不影响施工进度的经济可行的结构加层方案. : 荷载; 轴压比; 加层 :TU973 : : 1007- 855X(2004)06- 0088- 03 The Construction Design of Zhongcheng Plaza Storey- Increasing LING Y uhong ( rchitecture Design Research Institute, South China University of Technology, Guangzhou 510641, China) Abstract: ZhongCheng plaza is required to be heightened from former- designed forty- six storeys to fifty- one storeys. The shortcoming of the structure analysis softwareTBS 5. 0 adopted by the designer is investigate atten tively. nd by way of properly apprehending and implementing clause in code and necessary structure adjust ment, a new increase- plan is put forward and is proved feasible. Key words: load; axial press ratio; storey- increasing 2 13 m ,,2 , 46 , 1( , ) . 2 - , 7 , 0. 45kN/m , . 36 ,,, 51, 185m. 1 5,, ,,. 7 , 60 m. ! (GBJ 3- 91) , , 0.75.[TBS 5.0] , !. , . : 1) (TBS 5. 0) ,. !(GBL11- 89) 4. 1. 3 ,, : 2003- 11- 25. :( 1969.07~ ) ,. :.E- mail:lingyuhong88@ 126.com. 6 : 89 , 0. 5, . 2) TBS 5. 0,. ,∀ #, 10%. 3) !(GBJ 3- 91) 5.5. 7 : ∃ 20% , 5.2. 45.2.4 0. 1 .- , ,, ( ) 80% ;5 . ,6 , 0.85 . 3 , ,37 ;51, 48 51 ;,. . ,TBS 5.0 : : 51, ,37 , ; :, 40mm20mm, ; : !4. 1.3 , ;

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档