工艺参数对TC4 钛合金电阻点焊接头组织和性能的影响.PDFVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 工艺参数对TC4 钛合 电阻点焊接头组织 和性能的影响 张勇 綦秀玲 渊1.辽宁工程技术大学袁辽宁 阜新 123000 曰2.沈阳工业大学袁辽宁 沈阳 110870 冤 摘 要院对TC4 合金电阻点焊接头进行了试验研究遥 结果表明袁TC4 合金电阻点焊焊缝区的显微组织为粗大 的针状琢 ,近焊缝HAZ 显微组织为细小的针状琢 ,远焊缝HAZ 显微组织为琢 +茁 +琢 曰母材组织为琢 +茁 曰近焊缝HAZ 硬 度值最大袁远焊缝HAZ 硬度值最低曰在TC4 钛合金薄板厚度为 1mm尧焊接电流为6 kA 尧焊接时间为0.16s 时袁接头剪切 力达到最大值遥 关键词院TC4 钛合金曰电阻点焊曰显微组织曰硬度曰剪切力 中图分类号院TG453 文献标识码院A 文章编号院 Effects of Process parameters on Microstructure and Properties of TC4 Titanium Alloy Resistance Spot Welded Joints ZHANG Yong, QI Xiuling (1.Liaoning Tec hnical Unive rs ity, Fuxin 123000,China; 2.She nyang Unive rs ity of Tec hnology, She nyang 110870, China) Abstract 院The TC4 titanium alloy resistance spot welding j oints were studied. The results show that, TC4 titanium alloy resistance spot welding seams microstructure is bulky needle 琢 ; the nearly welding heat affected zone microstructure is small needle 琢 phase; the far welding heat affected zone of microstructure is 琢 +茁 +琢 organization; the parent material organizations are for 琢 +茁 double phase structure. HAZ reaches maximum value in near of the fusion line, and in the far welding heat affected zone fall lowest. TC4 titanium alloy sheet with thickness of 1mm, welding current to 6kA, welding time 0.16s, shear stress reaches the maximum value. Key words 院TC4 titanium alloy; resistance spot welding; microscopic structure; hardness; shear force