低压短周期贴面生产线介绍(Short-cycle_lamination_line_from_China_Foma)剖析.pptVIP

压机的打开和闭合采用了高精度的国际知名品牌的比例阀，上升下降过程中均设有减速缓冲位，在加快了压机打开闭合速度的同时，减少了震动和冲击。 The open and close of heating platen are controlled the proportionally valve from world famous companies. There is a buffer in the system which increase the open and closing of heating platen, and at the same time, reduces vibration. 框架板由整块钢板制作，三组框架板一起加工；保证了压机的整体安装精度，并可有效减少因加工尺寸不一致而造成的热压板在加压过程中的变形。 The three main frames are processed together from complete sheet which guarantees the precision and avoids deformation of heating platen in normal working. 热压板采用多路加热通道，单独设定上下热压板的温度，并通过独立的温控系统分别进行自动控制。控制精度可达到±1℃。 There are multiple thermal oil channel inside the heating platen, the temperature of upper and lower heating platen can be adjusted separately by different thermal oil circulation system. The temperature tolerance can be controlled under ±1℃. 压机上热压板升降的同步机构采用了齿轮齿条的传动方式，提高了压机打开和闭合时的速度及稳定性，并减少了震动的发生。 The synchronous lifting of heating platen is achieved by worm-gear transmission which reduces vibration and improves stability during open and close of heating platen. 在热压板与其它不需要加热的零件的安装位置均设有耐压的隔热板。可有效减少热量的损耗及降低环境温度。 Insulation pad is installed between heating platen and connecting components which reduces temperature loss in the system and surrounding temperature as well. 二、装卸板机2. Loader and unloader 采用夹钳式装板、真空吸盘出板方式，大大缩短了辅助时间和板坯无压受热时间。装板小车和卸板小车通过螺栓联接在一起，共用一台动力，在装板的同时完成卸板动作。真空系统采用真空发生器结合蓄能器的组合，使吸板动作更加稳定可靠 The assisting time and retention time of board before being pressed is decreased highly by adoption of feeding with clamp and discharge with vacuum sucking plate. The feeding carrier and discharging carrier are connected together and shared by one driving force. The laminated board is discharged the same time as the raw board fed into the press. The vacuum system is combined by vacuum generator and accumulator which makes the system running more stable. 三、真空吸板机3. Vacuum board sucker 真空系统采用真空发生器结合蓄能器的组合，保证吸板动作的可靠和稳定。吸盘升降采用气缸，速度快，故障少便于维护。吸盘移动采用伺服控制，结合同步齿形带实现吸盘的平稳移动，保证堆垛的整齐。 The vacuu