一种采用单照相机的三维人体测量方法.pdfVIP

第36 卷第5 期 东华大学学报(自然科学版) Vol. 36 , No.5 2010 年 10 月 JOURNAL OF OONGHUA UNIVERSITY(NATURAL SCIENCE) Oct. 2010 文章编号: 167卜0444(2010)05 - 0536 - 05 一种采用单照相机的三维人体测量方法 方 金a ，任立红a ，丁永生a， b ，郝矿荣a， b (东华大学 ι 信息科学与技术学院;b. 数字化纺生H1*装技术教育部工程研究中心，上海 201620) 摘 要:非接触式三维人体自动测量是现代化人体测量技术的主妥特征，也是今后人体测量的趋势所在.在分析国 内外非接触式三维人体测量方法的基础上，提出一种采用单照相机的三维人体测量方法.首先通过在单照相机前加一 套镜面组合系统，进行实时拍照，获得一张同时记录人体的正面和侧面的照片z 然后通过基于图像的人体特征区域和 特征参数提取得到人体尺寸信息(尺寸、轮廓点和轮廓线).试验结果验证了此方法的可行性. 关键词:非接触式三维人体测量z 镜面系统z 人体特征提取 中固分类号:.1P 39 1. 41 文献标志码:A A 3D Body Measurement Method with a Single Camera FANGJINa , REN Li-honga, DINGYong-shenga ,b , HAOKuang-rong 3 ,b (1. ωJeee of IJW咽1Dlti帽Scienæ and TI优加1OIOgY; b. Er眼neerIng R，国即由 cen阳. of Digi剑zed Tex笛Je FI曲ion Tedmology , Ministry of 副m伽111 ，队JDgbua Uniy惊雷ty. sbangbai 201620 ，臼iDa) Abstract: No n-touch 3D human body measurement is the main feature of modem body measurement technology and the trend of the future body measurement. Based on current research , a 3D body measurement method with a single camera is presented Firstly , a mirror system is located before the camera , and píctures which include both front and side appearance of a human body are acquired from the camera. Then 2D sÏze information of human body including size , contour points and contour lines by extraction of feature region and p町ameters based on the image mentioned before are obtained. The experiment results verify the f1 exibi1ity of this method. Key words: non-touch 3D human body measurement; mirror system; body feature extraction 随着人们对服装个性化设计的要求，服装的量 触式测量向非接触式测量、由二维向三维方向发展3 身定制逐渐进入成衣生产领域.人体测量系统是实现 个阶段，并向自动测量和利用计算机测量、处理和分