diy解决希捷固件门的方法(国外英语).docVIP

diy解决希捷固件门的方法(国外英语资料) The BIOS does not recognize the hard disk and DIY solves the Seagate firmware door Machine failure description: 1, the machine self-check slowly, display the IDE drives... It is. Unable to start the system, the cd-rom boots Windows PE or partition software, unable to find the hard disk. The hard disk is always bright, and the hard disk motor is moving normally. Such a problem is the result of Seagates firmware problem. If the hard drive works properly, you can fix the firmware by updating the firmware (the new firmware will turn off the hard drive cache, and all the performance drops). But now the hard drive is dead, the BIOS cant be identified, only through serial port debugging. Asking people to solve the problem on taobao is at least 100 yuan (which is also the way they are used), and finding professional maintenance is even more astronomical. Although no hard drive can be replaced, the data is so invaluable that it can be abandoned at will. Lets talk a little bit about the details of the repair process, and hopefully it will be useful for friends who want to do DIY. Material report The Nokia ca-42 data line T6 screw driver a A pair of scissors The card is protected by one A headset line A computer with a USB port that can be launched normally (connecting the ca-42 data line, debugging the hard drive, I use WIN XP) SATA hard drives (powered by hard drives) Important: SATA power must use native SATA interface, dont use four needles turn SATA interface, also do not use hard disk box SATA power, otherwise the unpredictable disasters may occur. The cost of maintenance is actually only over 20 yuan, and the most important of these materials is the ca-42 data line and the T6 screwdriver. Of course, you need a computer that you can use, and other materials are easier to find. Making paper 1, handle the wire. Cut off the non-usb cable from the ca-42 cable, with three lines separating it, two of which are the TX and RX ports we need to use. Unplug t