刀具半径补偿(国外英文).docVIP

刀具半径补偿(国外英文资料)Tool radius compensation catalogbrief introductionMain usecommon methodWorking principleParameters and settingsSignificanceEdit this paragraph introductionNC machine tool in the machining process, it is under the control of the tool path, for convenience, users always follow the parts contour processing programming, the contour of the part so in order to process the necessary, in the internal contour machining, tool center to parts of the medial offset a tool radius in outside; the contour machining, the cutter center must be shifted towards outside parts of a tool radius. As shown in figure 3-25. This program according to the outline of parts and pre-set offset parameters, NC device can automatically generate tool center track function, called tool radius compensation function. In the figure, the solid line is the contour of the part to be machined, and the dashed line is the center of the tool path. According to the ISO standard, when the tool center trajectory is on the right side of the programming trajectory (the part contour), it is called the right cutter complement, and is implemented with the G42 command. Otherwise, it is called the left cutter complement, and is implemented with the G41 command.Cutter radius compensationEdit the main use of this paragraph(1) because of the tool wear or the change of tool radius caused by tool change, it is not necessary to re program, only the corresponding offset parameters can be modified.(2) the allowance of machining margin can be realized by modifying offset parameters without having to prepare a program for roughing and finishing.Edit this paragraph commonly used methods1.B cutter compensationFeatures: the center of the tool path is connected by arc between segments.Advantages: the algorithm is simple and easy to implement.Shortcoming:(1) when the profile is processed, the tool is always cut at one point due to the arc connection, and the outer corner of the outer corner is machined into small rounded c