手机内置天线设计(国外英语).docVIP

手机内置天线设计(国外英语资料) The phones built-in antenna design recommended Why do you think NOKIA has a good cellphone signal? Why do you think the MOTO phone has a good signal and stable performance? The main reason is that big companies such as NOKIA and MOTO have different ideas in the design process for antennas and RF. As the MOTO company claims, the first thing you need to do is to make sure that the phone is a good signal, that is, the RF is good. Second, you want to make sure that the audio is good and you dont know what the phone is. Therefore, in their initial plan, they contain the overall design of the environment based on appearance, motherboard, structure, etc. Because of the appearance, motherboard, structure, antenna is taken as a whole, provide RF antennas room and internal environment is very reasonable, so the antenna performance is superior. In contrast, domestic mobile phone design, responsible for project management and the lack of awareness of persons taking charge of the project design of antenna, the restriction of the structure scheme and the shape is the highest at the same time, in the end to match antenna, the antenna debug matching accounts for most of the time of the whole process of antenna design, this and include the overall design of antenna have substaintial distinction, often leads to the area of the antenna and the volume is not enough, or placed under the antenna horn, cameras, motor, FPC line and other components, causing the deterioration of antenna performance. In fact, if the plan pre-research and overall design phase, make the RF effectively involved with technical personnel in the field of antenna, RF design and antenna effectively and evaluation, ID, structure, design of RF antenna and overall performance, then design a high quality mobile phone product is easy? A built-in antenna for general design of mobile phones The main board A: when the wiring of the RF is connected to the RF, it should be careful to use the 45 degree Angle o