数控中级工试题(国外英文).docVIP

数控中级工试题(国外英文资料) Best answer: a review of advanced maintenance theory First, the multiple-choice questions (Title 1~60). Choose a good answer and add the letters to the brackets in the question. 1 points for each question.): 1. in multi-stage inter stage coupling, the low voltage amplification circuit mainly accepts (A) coupling mode. (A) resistance capacitance (B) direct (C) transformer (D) inductance 2. if a straight line current direction from north to south, put a small needle * * * rotate on top of it, then the small needle N bias (A). (A) the West (B); the East (C); the South (D); the North 3. according to the electromagnetic induction law e= -N * (delta / T), the induced electromotive force is in the delta T period of time (A) (A) average value (B), instantaneous value (C), RMS (D), maximum value 4., in the loop of the current change rate of a certain environment, self inductance should be large, indicating that the coil (D) large. (A) magnetic flux (B), magnetic flux change (C), resistance (D), self induction electromotive force 5. coil with inductance of 0.1H, when its touch current changes from 10A to 6A in 0.5 seconds, the absolute value of electromotive force generated on the coil is (C) (A) 4V (B), 0.4V (C), 0.8V (D), 8V The polarity of the 6. mutual inductor coil is generally evaluated according to (D). (A) (B) left hand rule (C) Lenzs Law (D) the same end The peak collector output voltage of the 7.JT-1 transistor plotter is (B) volts. (A) 100 (B) 200 (C) 500 (D) 1000 The brightness on the 8. oscilloscope panel is the potentiometer knob for the adjustment (A). (A) control gate negative voltage (B), control gate positive voltage (C), negative pole voltage, negative voltage (D), negative positive voltage 9., in the use of SBT-5 type oscilloscope to observe the test signal, the X axis selection should be placed in (D) file. (A) electronic scanning of 1 (B) 10 (C) 100 (D); 10., with SR-8 double track oscilloscope to observe the lower frequency of the signal