AUMA 澳玛执行器内部培训PPT概要1.ppt

下载文档 降价啦

13
0
约2.98万字
约 54页
2017-07-03 发布于湖北
举报
版权申诉
保障服务

AUMA 澳玛执行器内部培训PPT概要1.ppt

1、本文档共54页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

AUMA 澳玛执行器内部培训PPT概要1

样图接口ＣＯＭ－ＡＣ 1. 硬件 1.8. MWG for SG 1.8. MWG for SA PROFIBUS DP (Z031.231/01 or /03) V1=System OK (green) LED is illuminated = shows the correct supply of voltage. LED is blinking = Micro controller is defect LED is off = no supply with voltage V2=DATA EX (green) LED is illuminated = ready for DATA exchange V3=CAN STATE (red) LED is illuminated or blinking=communication fault to the logic board. LED is off = communication to logic board is OK 1 2 ON V16=DigIn 1 V19=DigIn 2 V22=DigIn 3 V25=DigIn 4 LED’s are illuminated when customer supplied 24 V on the digital inputs X2 to BUS connection board X 2.1 (K1PR) = XC 33 Redundancy 1 X 2.2 (K1PR) = XC 34 Redundancy 1 X 2.3 (K1PB) = XC 31 X 2.4 (K1NA) = XC 32 X 2.5 GND/FI = XC 39 X 2.6 5VDC/FI = XC 40 X 2.7 (K2PB) = XC 35 X 2.8 (K2NA) = XC 36 X 2.9 (K2PR) = XC 37 Redundancy 2 X 2.10 (K2PR) = XC 38 Redundancy 2 X4 Digital/ Analog Inputs X4.3 to XC 12 = ANIN 1 (+) X4.4 to XC 13 = ANIN 1 (-) X4.5 to XC 27 = ANIN 2 (+) X4.6 to XC 28 = ANIN 2 (-) X4.8 to XC 7 = 0V X4.9 to XC 3 = DIGIN 1 (24VDC) X4.10 to XC 4 = DIGIN 2 (24VDC) X4.11 to XC 5 = DIGIN 3 (24VDC) X4.12 to XC 6 = DIGIN 4(24VDC) 3 All arrows start by PIN No. 1 S1 板子地址 S2备用standard setting S1.off / S2.offif two boards of the same type are used the setting of the second board have to be changed to S1.on / S2.off top bottom 2 1 BG10 Identification characteristic between MODBUS and PROFIBUS board 1 top bottom 2 BG12 V4=STATE (green) LED is illuminated or off=bo