CATIA鼠标曲面建模概要1.docx

CATIA V5 Surface-modeling (Tutorial 2-Mouse)CATIA Surface-modelingTutorial 2AImport 2D outline drawing into CatiaBuild 3D curves based on the imported drawingBuild the upper surfaces of the mouse (by Generative Shape Design)Tutorial 2BDo the draft analysis to search any undercut portion on the upper surfacesAdjust the curvature of the problem surface manuallyBuild the lower surfaces of the mouseConvert the surfaces into a solidTutorial 2CBuild the parting surfaces based on the imported drawingCreate components from the finished model Re-assemble the components into a product Modify the outlook of the master model and then get all components updated automaticallyPlease be reminded that this series of tutorials is designed to demonstrate a design approach with CATIA, rather than the command itself. Download the 2d outline drawing (mouse_outline.dxf) from the web: .hk/~mmdsham/Ex2.htmCreate a new project folder and store the downloaded file into the folderEnter CATIA by double-clicking its icon on the desktop.(If the license menu pops up, select ED2 and close CATIA. Then reopen again).By default, an empty “Product” file is created. But now, you don’t need this, just select “File/Close” on the menu bar.Select “File/Open” on the menu bar and select the downloaded drawing (mouse_outline.dxf)To confirm that the size of the drawing is correct:-Click “Dimensions” icon;Click on the scale line of the drawing; Check if the displayed dimension is 50mm; If not, we need to enlarge or shrink the drawing into the correct size.To copy and paste the drawing into 3D space:-Multi-select all entities on the drawing, except the scale bar;Click “Copy” iconSelect “File/New” on the menu bar;Select “Part” as the Type;Enter “Mouse_mastermodel” as part name;Leave the two options “Enable hybrid design” “Create a geometrical set” unchecked; now a new empty part is created;(To confirm that Hybrid Design is not activated), select Tools/Options/infrastructure/Part Infrastructure… then confirm that