基于MSC Adams虚拟样机技术的桥梁主拱安装工艺分析.pdfVIP

第l6卷第4期 计 算 机 辅 助 工 程 V01．16 No．4 2007年 l2月 COMPUTER AIDED ENGINEERING Dee．2007 文章编号：1006—0871(2007)04-0004-03 基于MSC Adams虚拟样机技术的 桥梁主拱安装工艺分析 张 氢， 余陈鑫， 杨 林 (同济大学机械工程学院，上海 200092) 摘 要：以某大桥主拱安装工况为对象，应用MSC Adams软件建立由塔架、主拱、钢绞线和提升千 斤顶组成的虚拟样机模型．通过多项式插值协调两组提升钢绞线的运动关系，模拟两组钢绞线均 衡平稳地提升大桥主拱并竖转到指定位置．通过仿真分析，可以确定钢铰线长度、提升行程、塔架 受力时间历程、提升千斤顶配置等X-艺数据．结果表明该方法可以详细分析施X-历程，从而增强工 程的施工安全． 关键词：虚拟样机；主拱；竖转；多项式插值；动力学仿真；MSC Adams 中图分类号：U445．35；TP391．9 文献标志码：A Analysis on installation of bridge’S main arch using MSC Adams virtual prototype ZHANG Qing，YU Chenxin，YANG Lin (College of Mechanical Eng．，Tongji Univ、，Shanghai 200092，China) Abstract：Taking the erection process of a bridge’S main arch as an object，a virtual prototype model composed of lift pylon tower，main arch，steel strands，and lifting jacks is built using MSC Adams．The polynomial interpolation method is used to coordinate motion relationship between two sets of steel strands．A simulation that using such two sets of steel strands to lift the main arch smoothly to given posi— tion is carried out．With the simulation results，important technological parameters such as the length of steel strands，lifting distance，time history of reaction force on the base of lifting pylon as well as the con— figuration of lifting jacks can be determined．The results show that the method can analyze the construc— tion process in detail and enhance the safety of construction． Key words：virtual prototype；main arch；vertical rotation；polynomial interpolation；dynamic simula— tion；MSC Adams