EN50128 2011标准培训.pptVIP

EN50128 2011 Seminar Summary Yao Jun Feb.27,2012 EN50128 2011 Seminar 北京英华经纶交通运输有限公司（劳氏北京）于2012年2月9日在北京举办了EN50128新版标准研讨会，会议由 Professor Ali Hessami 讲解（欧标修订工作组WG11主席，负责EN50128:2011的修订) 。 Ali Hessami教授介绍了系统安全保障的基本概念，并从标准制定者的角度介绍了新版的EN50128，同时还谈到了EN50126系列标准的整合和未来。 下面的ppt文档是基于本次研讨会的总结，也加入了个人的理解，并把我的提问和回答也都列出。如果有不正确的或者遗漏的地方，请及时指出，谢谢！ Main Differences between EN50128 2011 and EN50128 2001 Main differences in New EN50128 are the following contents: Organization and role Personnel competence Support tools Application data or algorithms Deployment and maintenance Organization and Role Organization, role and independence requirements (section 5.1) Add the role of RQM (requirement manager) , INT(Integritor) and TST(Tester) Add the description of these roles The independent requirements for roles are clearly explained. Person competence Personnel competencies are added in Annex B of EN50128 2011. An example is shown: Support Tools (1/2) Support Tools and Languages (Section 6.7) Provide evidence that potential failures of tools do not adversely affect the integrated toolset output in a safety related manner. Classification Three classes of tools so far as reliability and safety impact is concerned as T1,T2 and T3. Each class will place different requirements on the required assurance Support Tools (2/2) T1 class (section 3.1.42) generates no outputs which can directly or indirectly contribute to the executable code (including data) of the software Example： a text editor, configuration control tools. T2 class (section 3.1.43) supports the test or verification of the design or executable code, where errors in the tool can fail to reveal defects but cannot directly create errors in the executable software. Example：a test coverage measurement tool and a static analysis tool T3 class (section 3.1.44) generates outputs which can directly or indirectly contribute to the executable code (including data) of the safety related system Example： a source code