energyplus步骤.docVIP

一、建筑外观设计 1. 运行预定义无窗建筑Exercise 1A, no weather file 2. 1) 编辑IDF Editor,file save option save order Original with New at Top , Special Format for Some Objects 为 yes 2) 将Exercise 1A另存为Exercise 1B，IDF Editor file 选择dataset file中打开，在window glass material中，选择CLEAR 6MM粘贴到Exercise 1B， MATERIAL:WINDOWGLASS, CLEAR 6MM, !- Name SpectralAverage, !- Optical Data Type , !- Name of Window Glass Spectral Data Set 0.006, !- Thickness {m} 0.775, !- Solar Transmittance at Normal Incidence 0.071, !- Solar Reflectance at Normal Incidence: Front Side 0.071, !- Solar Reflectance at Normal Incidence: Back Side 0.881, !- Visible Transmittance at Normal Incidence 0.080, !- Visible Reflectance at Normal Incidence: Front Side 0.080, !- Visible Reflectance at Normal Incidence: Back Side 0.0, !- IR Transmittance at Normal Incidence 0.84, !- IR Hemispherical Emissivity: Front Side 0.84, !- IR Hemispherical Emissivity: Back Side 0.9; !- Conductivity {W/m-K} 3） 在WINDOWGAS中选择 AIR 3MM,粘贴到Exercise 1B中。 MATERIAL:WINDOWGAS, AIR 3MM, !- Name Air , !- Gas Type 0.0032; !- Thickness {m} 4）在Exercise 1B 的 CONSTRCTION中新建对象 CONSTRUCTION, DOUBLE PANE WINDOW, !- Name CLEAR 6MM, !- Outside Layer AIR 3MM, !- Layer #2 CLEAR 6MM; !- Layer #3 Surface:HeatTransfer:Sub,新建对象 EAST WINDOW, !- User Supplied Surface Name WINDOW, !- Surface Type DOUBLE PANE WINDOW, !- Construction Name of the Surface ZONE SURFACE EAST, !- Base Surface Name , !- OutsideFaceEnvironment Object autocalculate, !- View Factor to Ground ,