LTE_基本切换流程(全英文)概要1.pptVIP

Company Confidential TietoEnator Information Technology (Beijing) Co., Ltd. 迪 易 通 信 息 技 术（北京）有 限 公 司 Copyright ? 2007 TietoEnator Corporation Page * Company Confidential TietoEnator Information Technology (Beijing) Co., Ltd. 迪 易 通 信 息 技 术（北京）有 限 公 司 Copyright ? 2007 TietoEnator Corporation Page * Handover Sharing LTE HO classification 1.RA method: contention HO non-contention HO 2.HO area: inter-HO, intra-HO 3.HO Interface: X2 HO, S1 HO 4. HO Frequency: inter-frequency HO, intra-frequency HO 5. HO RAT: inter-system HO, intra-system HO HO Technology 1.LTE HO: hard HO 2.GSM: hard HO 3.WCDMA: soft HO, softer HO 4.TD-SCDMA: relay HO Measurement Control Measurement Control HO Req HO decision Adminssion control HO Req ACK HO Command Detach Synchronize SN status transfer Data Forwarding UL allocation(TA) Path Switch Req ACK U-plane Update Path Switch Req U-plane Update ACK Data Transfer HO Complete UE S-eNB T-eNB MME X2 HO flow HO Event Mn is the measurement result of the neighbouring cell, not taking into account any offsets. Ofn is the frequency specific offset of the frequency of the neighbour cell (i.e. offsetFreq as defined within measObjectEUTRA corresponding to the frequency of the neighbour cell). Ocn is the cell specific offset of the neighbour cell (i.e. cellIndividualOffset as defined within measObjectEUTRA corresponding to the frequency of the neighbour cell), and set to zero if not configured for the neighbour cell. Ms is the measurement result of the serving cell, not taking into account any offsets. Ofs is the frequency specific offset of the serving frequency (i.e. offsetFreq as defined within measObjectEUTRA corresponding to the serving frequency). Ocs is the cell specific offset of the serving cell (i.e. cellIndividualOffset as defined within measObjectEUTRA c