cad标准(国外英文资料).docVIP

cad标准 Banners can be used. You can draw the picture vertically and then rotate 90 degrees. The title bar should be placed in the lower right corner. If the direct cross the steps: click the rectangle command (or command REC) - just on the screen a bit -- D-- input space -- enter 297 enter, enter 210 enter -- click the left mouse button on the screen. The end, this is a standard A4 paper box, the inside of the frame is the inward migration of 10, offset 25 side sign bar, title bar and bar sign like you need to draw no fixed format. CAD drawing standards reference (larger image of the Design Institute) Take a look at the drafting standards within the regular design institute. China architectural design and Research Institute (Shanghai); Shanghai Sen Architectural and Engineering Design Consultants Limited Internal standard. I. architectural drawing standards CAD mapping standards Chapter I General Provisions Article 1.0.1 these Regulations are formulated for the purpose of standardizing the CAD drafting standards of our hospital, solving the problem of sharing computer resources and improving the design efficiency Rules relating to this major. Article 1.0.2 the provisions applicable to all China architectural design and Research Institute (Shanghai); Shanghai Sen Architectural and Engineering Design Consultants Limited signed, and CAD drawings of all the plans, preliminary design, construction drawings phase of the design drawings. Article 1.0.3 this standard refers to some of the following standards. 1. uniform rules for CAD drawings of building construction GB/T 18122-2000 2.CAD engineering drawing rule GB/T 18229-2000 3. uniform standard for building construction drawings GB/T 50001-2001 4. architectural drawing standard GB/T 50104-2001 5. building structural drawing standard GB/T 50105-2001 6. construction drawings of concrete structure Plane representation methods, drawing rules and construction details 03G101-1 7. standard drawing for water supply and drainage G