MasterCAM9.1的刀具清单功能.docVIP

MasterCAM9.1后处理自动生成刀具清单，使用方法： 将下面的内容复制到记事本内，并将其更名为Mpfan.pst，pst为后缀，再将该文件 拷贝至MasterCAM9.1的安装目录C:\Mcam9\Mill\Posts，覆盖原文件，然后启动软件， 可以在NC程序开头生成刀具清单。经典版本，绝对好用！ # Post Name : MPFAN # Product : MILL # Machine Name : FANUC # Control Name : 6M # Description : GENERIC FANUC 6M STYLE POST # Associated Post : # Mill/Turn : NO # 4-axis/Axis subs. : NO # 5-axis : NO # Executable : MP 4.03 # # ************************************************************************ # *----------------------------------------------------------------------* # * POST PROCESSOR INTENDED FOR VERSION 6 BETA TESTING * # * * # * D O N O T D I S T R I B U T E ! ! ! * # *----------------------------------------------------------------------* # ************************************************************************ # # --------------- #| REVISION LOG | # ------------------------------------------------------------------------ # Programmers Note: # CNC 8/15/2005 - grt - Updated for Mill Version 6 # # --------------- #| FEATURES: | # ------------------------------------------------------------------------ # Users Note: # # Following Misc_Reals Misc_Integers are used: # # mi1 - Work coordinate system # 0 = Reference return is generated and G92 with the # X, Y and Z home positions at file head. # 1 thru 3 = Reference return is generated and G92 with the # X, Y and Z home positions at each tool. # 4 thru 9 = The WCS of G54 thru G59 respectively at each tool. # # Options / Usage: # It is recommended to start and end cutter compensation on a linear move. # Rotary axis assumes a Z plunge at feed into part, position of the # substituted axis at absolute zero position and the retraction from path # by the post call to the G28 machine Z home position. # --