2011级《电子技术》复习修改版（国外英文资料）.docVIP

2011级《电子技术》复习修改版 2011 levels of electronic technology review modified version First, the noun explanation: 1 differential signaling: a pair of signals of equal magnitude and polarity opposite Type 02.N semiconductors: the number of free electrons in semiconductors increases greatly, and free electrons lead to the main mode of conduction of this type of semiconductor Sequential circuit: 3 common mode amplification factor: the access signal is the amplification of the voltage signal Type 04.P semiconductor: a semiconductor with hole conduction as the main mode of conduction 5 logic gate circuit: there is a logical relationship between the input signal and the output signal gate circuit. 6 differential mode amplification factor: 7 common mode rejection ratio: amplification circuit for differential mode signal amplification Ad and the common mode signal amplification ratio of Ac 8 encoder: a device that produces information in the form of a given code 9 decoder: a device that converts binary codes into their corresponding signals or decimal numbers when encoded. 10. micro change equivalent: the amplifier circuit consisting of a nonlinear component transistor is equivalent to a linear circuit. Two. Fill in the blanks: 1 bipolar transistor is (current) control device, when it works in the amplification area, the emitter node needs to add (forward) bias, and the collector node needs to add (reverse) bias. The field effect transistor is a (voltage) control device. 2 in the active filter, the operational amplifier operates in (linear) region; in the hysteresis comparator, the operational amplifier operates in (nonlinear) region. The 3 measured a normal linear amplifier transistor three pins x, y and Z on the static voltage was 6.7 volts and 2.4 volts and 1.7 volts, can be judged respectively the transistor (collector), (base) pole, pole (launch). The inverting input terminal potential of the 4 operational amplifier is raised, and the potential of the output terminal will be