CAD解决字体问题（国外英文资料）.docVIP

CAD解决字体问题 CAD solves font problems 1., open other peoples map, can not find the original document font how to do? Very good way! I hope to open someone fixed a map, and constantly replace the font file I did not have, how can you once and for all? Answer: there are two ways, A: copy to replace the font for the font name will be replaced, for example, to open a map, that can not find the JD font, you want to replace it with hztxt.shx, then you can make a copy of hztxt.shx, named jd.shx, can be solved. However, the disadvantages of this approach are obvious, taking up too much disk space. Its better to use the following method. 2. retrieve fonts Use AutoCAD to draw people the most irritated is to copy the map from elsewhere in the machine can not find the corresponding font, and every kind of garbage, cause can not find the reason is that people use the font font storage location and their position in the machine is not the same, the general solution is re defined, but sometimes this approach is not always effective, and this process may also cause unexpected errors and make the AutoCAD collapse, causing more likely destroyed the graphics file. In a chance, I used another AutoCAD command to achieve the purpose of killing two birds with one stone, that is, using the recover command. First run AutoCAD, select the file menu in the recover command to select the graphics processing, repair, in the repair process will select the font dialog box appears, then you can pick the correct font file to redefine the repair, after the completion of the text you can normally display. One thing I would like to remind you is that if the Chinese file used in the graphic file is a non GB encoded font file, you must have the corresponding font file to display the text normally. Two: create a acad.fmp AutoCAD file in the r14/support directory, if the original is the direct file open, this is a ASCII file, enter JD; hztxt, if there are other fonts to replace, can be a separate line, such as