SC200施工升降机基础施工方案（国外英文资料）.docVIP

SC200施工升降机基础施工方案 Overview of SC200 construction elevator construction scheme of the foundation engineering project overview 1. chapter 1.1, project name 1.2, project overview This project is the name of the building residential area of A1-A7, D1-D7, A exergy shops, supermarkets, comprehensive cultural activity center, The next room in the construction area of 35000 square meters; the construction area of 40016.01 square meters basement the basement on the 2 floor 23 The basement layer height is 6.2M the basement two layer 4.5M the total building height of the 79.3M. 1.3, the project site The project is located in Panyu District Shilou town Chigang village. 1.4, design The maximum height of the whole building is 23 79.00m. This design uses the installation of 2 sets of SC200/200TD construction elevator Respectively for A5-A7 building structure construction. No. 01# to the 02# machine model SC200/200TD. One of the 6-1~6-5 6-G 6-14~6-17 design of shaft section, all of the 6-G axis in the center line are included for construction elevator. The whole construction went up The erection and installation of the lowering machine eventually reached 50m height. 2.SC200/200TD construction lift conditions SC type construction hoist the electrical and mechanical safety system of the main electric components are very reliable imported the original The electric circuit is simple easy operation and maintenance of the low failure rate is the vertical transportation equipment safety, the construction of the university. The construction of the lift drive mechanism with double motor drive and motor drive three to two types of the plug-in can be built at the The user selects each motor is equipped with DC electromagnetic brake and the brake friction pair with automatic tracking and regulating braking gap The function of improving the braking performance of the balanced and reliable. 2.1. model specification S said the symbol C said rack type construction elevator SC200/200 said the three