弹簧操动机构在真空断路器应用（国外英文资料）.doc

弹簧操动机构在真空断路器应用 With the rapid development of vacuum circuit breakers, higher requirements have been put forward for supporting operating mechanisms. The earliest use of the electromagnetic actuator, because the closing of large power, large investment, the breaker closing speed is low, gradually closing power is small, the output characteristics of the vacuum breaker and the match, replaced by long life spring mechanical actuator. The earliest design of the CT8 spring actuator is specially designed for less oil circuit breakers. The improved CT10 and CT12 mechanism, in principle the same as CT8 and similar in structure, still has the disadvantage of not matching with the vacuum circuit breaker. In order to meet the needs of vacuum breaker and improve the operation reliability, the spring operating mechanism of CT17 and CT19 is developed according to the mechanical characteristics of vacuum circuit breaker. The principle of CT17 and CT19 energy storage is the same, the driving and tripping systems are similar, but the structure is arranged two. Taking CT17 as an example, the problems in the application of vacuum circuit breakers are analyzed and solutions are put forward. Comparison of performances between two CT17 and CT10 bomb operated mechanism in vacuum circuit breaker. The CT10 was the earliest fully improved spring operated mechanism for 35kV vacuum circuit breakers. Because the energy storage mode is a ratchet structure, the utility model is subjected to impact load when running, so that the mechanical strength is high, the running noise is large, and the service life is short. The CT17 mechanism absorbed the advantages of CT10 and realized a breakthrough in the principle of energy storage. Adopting the most simple and reliable gear drive mode in the mechanical transmission system has fundamentally changed the original shortage. The utility model has the advantages of stable transmission, low noise and long service life, and the output characteristics match wi