电工题（国外英文资料）.docVIP

电工题 Http:// 17, how to properly repair and repair asynchronous motors? Answer: before dismantling the motor, all kinds of preparatory work should be done, such as the tools used, the inspection before the demolition and recording work. Remove the motor steps: 1, remove the pulley or coupling coil, in the disassembly of the belt wheel and the coupling should be prepared before the mark, the installation should get rid of the rust, clean the rear can be reset; II, remove the cover: remove the bearing cover, then cover and mark the front and rear cover, should be installed according to the marked reduction;, demolition of the rotor in between the stator and the rotor should wear thick pad to prevent damage to the stator winding, if the rotor is very heavy, available lifting equipment installation rotor to check whether there is debris in the stator, and the shaft extension end end cover is arranged on the rotor with the fan and the back cover are packed together. 18, how to judge the cause of malfunction from the abnormal vibration and sound of asynchronous motor? Answer: asynchronous motor produces abnormal vibration and abnormal sound, mainly mechanical and electromagnetic two reasons. Mechanical aspects: 1, the motor fan blade damage or fastening screws loose, causing the fan blade and the blade cover collide, it produces the sound with the rattle of the weight, size; II, due to wear or improper thoughts bearing shaft, resulting in motor rotor eccentricity will cause the serious stator and rotor rub, the motor to generate severe vibration and uneven grazing sound; the motor, because of the long-term use of the anchor screw loose or foundation is not strong, so the motor vibration is not normal in the electromagnetic torque under the action; the long-term use of motor bearings due to lack of lubrication oil formed in grinding operation or bearing the ball is damaged, so that the motor bearing chamber issue abnormal hiss or grunt. Electromagnetic reasons: abnormal sou