E1接口配置(外国英文资料).docVIP

E1接口配置 The E1 interface can have two configurations: L is used as a channelized (Channelized) E1 interface. In the physical interface is divided into 31 time slots, all the slots can be arbitrarily divided into several groups, each time slot after use bundled as an interface, the logic is the same as the synchronous serial port, support PPP, LAPB, frame relay and X.25 link layer protocol. L is used as a non channelized (Unchannelized) E1 interface. The interface acts as a G.703 synchronous serial port of 2M at physical rate, and supports link layer protocols such as PPP, frame relay, LAPB and