开水壶英文说明书.docVIP

It’s normal if situations as below happen during operating: Slightly noise from the heating tube when heating. It takes a little bit longer time when it’s under low temperature. Slightly water drops on the spout. Bubbles on the tank when the water is about to run out. Problems and Solutions Failure Phenomenon Reasons Solutions Kettle not working Power off Run out water Power on Fill in water No water comes out No steam comes out Run out water The tank not being well installed Fill in water Well install the tank Low water flow Large amount of steam Run out water The tank not being well installed Fill in water Well install the tank Loud noise Kettle not being well placed Place the kettle flat on the table DO NOT ALLOWED CHILDREN USE THIS PRODUCT DO NOT ALLOWED SOAK THIS PRODUCT IN THE WATER OR BEING WASHED BY WATER Wash Take the inner base, pour water in the kettle to wash it Empty the kettle after washing Install the inner base after washing Fill in water Open the top cover to fill in water. Boil water Turn off the kettle 2 seconds in advanced, let the boil water completely come out. Spout comes out steam If the large amount of steam comes out Then please fill water in as arrows indicate Poor water quality, impurities Poke the silicone under the base Fill water in as arrows indicate, after that then put the silicone on 1 Switch 6 Inner base 11 Steam vent 2 Base 7 Top cover 12 Sewage Breach 3 Handle 8 Display 13 Plug 4 Tank 9 Spout 14 Water inlet base 5 Gage 10 Water tray 15 Water outlet base Rated voltage 220V-50Hz Rated power 2.2KW Rated electric current 10A Hot water capability 24L/h Tank capacity 2.5L Water temperature 97C+/-3C Using product temperature 5C-40C Thermal conversion efficiency 98.5% Instruction Installed, fixed, and disassembled by professional technical staff only. DO NOT plug/unplug the power to make the machine work/stop. DO NOT place the machine upside down. Do not in touch of water in case of leakage or short-circuit. Cut o