海勒实业公司.docVIP

HEELER实业公司 现场安装清单 顾客名：________________ 炉子 S/N: ____________________ 型 号：________________ 工 程 师: ____________________ 日 期：________________ 事项 待工程师审核的 Verify all the items on the packing ship are shipped with the oven 确认全部的事项在打包然后装船炉子的事情上 Verify that there is a back order for the items if not shipped with the oven 如果炉子不能被装船，确认这些背后的事因 Verify order and pick list,B/M agreed with the oven 确认订单和数量，B/M与这个炉子一致 Check and then remove shock detectors 确认然后去找休克探查器 Install computer and monitor and connects all Serial cable/Ethernet connenctions 安装电脑和监视器和关联所有的以太网连接 Verify all power wirse screw conncetions for proper torque (all circuit breakers,tansformers,power terminal block, distribution,,SSR power connection) 确认所有的电源电线螺丝连接适当的扭规（所有的断路器，变压器， 功率负载，接线板，SSR电力连接） Verify Smema connection are secured and tight 确认网络连接是通的和紧密连接在一起的 Verify all terminal block wires are correct and no exposed wires 确认所有的接线端子盒是对的和不是输出端子盒 Verify all terminal jumpers are secured and tight 确认所有的跳线都是通的和紧密的 Check 3 phase power connection and verify incoming voltage and serial tag listed voltage is same 检查3相的电源连接和验证传入电压和系列标签列出电压相同 Verify incoming supply amperage match listed amperage on oven serial tag 确认传入安培供应匹配炉子上市 Verify main facility “PE”ground with oven frame ground connection 确认主要设施”PE”的地面烤箱的连接框架 Make sure BBU connections before power ON 在开启电源之前，请确认BBU的条件。 Turn ON main power switch from rotary switch for standard ovens. If oven equipped with EMO box,turn ON main power switch on EMO box and press and hold “POWER ON /RESET”button until “OVEN ON ”indicator lights up).(FOR very first time ，BBU needs to be turn ON manually after power ON) 打开主要的电源转换器转换标准的炉子。如果炉子装备EMO盒子，打开EMO的转换器盒子然后按下和“电源/复位”按钮，直到炉子启动指示灯亮起来。（第一次，当电源开启的之后，BBU必须调到手动挡）。 Open top hood by hood lift key switch and verify no damage inside the oven chamber 打开顶部的罩用提升钮，确定没有损伤安装炉罩 Remove all packing material form inside the machine 删除所有的打包材料从安装这些机器 Measure the opening of the edge hold conveyor system in several locati