基于有限信息的铜吹炼动态过程智能集成建模 - 控制理论与应用.pdfVIP

26 8 Vol. 26 No. 8 2009 8 Control Theory Applications Aug. 2009 :2009 , , , , (, 410083) : , . , ; , –, ; , , . , 5%, . : ; ; ; ; : TF355; TP391.9 : A Intelligent integrated modeling for the dynamic copper-converting process based on limited data information WANG Ya-lin, GUI Wei-hua, YANG Chun-hua, XIE Yong-fang, SONG Hai-ying (School of Information Science and Engineering, Central South University, Changsha Hunan 410083, China) Abstract: For the copper-converting process with significant variation in dynamics and limited information of process, we propose an intelligent integrated modeling method based on its limited data information. First, we develop a nonlinear reaction kinetic model for the copper-converting process by the metallurgical reaction principles; second, we create a model for optimizing its kinetic coefficients based on the limited data and by using the Runge-Kutta formula. Finally, by employing particle swarm optimization and pattern searches with the typical sample set generated by intelligent decision, we put forward a hybrid intelligent algorithm to acquire the optimal kinetic coefficients for the dynamic model of copper converting process. The maximum relative error is less than 5%, when comparing the simulation result of our dynamic model with the real value of the Peirce-Smith(PS) converter in a copper smeltery. This shows the effectiveness of the proposed model. Key words: copper converting; dynamic process; intelligent integrated modeling; limited data information; hybrid intelligent algorithm 1 (Introduction)