英文版patran实例教程cantilever_plate.ppt

WS2-* PAT301, Workshop 2, September 2007 Copyright? 2007 MSC.Software Corporation  CANTILEVERED PLATE Workshop Objectives Model a cantilevered beam, using plate elements, subjected to a constant tip loading. The plate elements will undergo bending. MD Patran and MD Nastran will be used to create or analyze the linear static model. Problem Description Display the component of stress in the axial direction (direction along the length of the plate structure) and the deformed shape of the plate model. Plate material: Aluminum with E = 10 x 106 pa and n =0.3 Load on tip of plate = 8 N Software Version MD Patran R2 MD Nastran R2 Key Concepts and Steps: Database: create a new database with Analysis Code = MD Nastran and Analysis Type = Structural Geometry: create a geometric surface to represent the plate Elements: mesh the surface with plate elements Loads/BCs: constrain one end of the plate model, and apply the constant tip load to the other end of the plate model. Materials: specify an isotropic material for Aluminum Properties: create a 2D shell/plate property Analysis: Solution Type = Nastran Linear Static, Solution Sequence = 101, Method = Full Run Analysis: access analysis results by attaching the XDB file to database Results: plot X-component of stress and displacement results Step 1. Create a Database Create a database named cantilevered_plate.db and specify the model preferences: File / New Enter cantilevered_plate as the file name. Click OK. Choose Default Tolerance. Select MD Nastran as the Analysis Code. Select Structural as the Analysis Type. Click OK. a b d f c g e Step 2. Create Geometry of the Plate Geometry: Create / Surface / XYZ Click under Vector Coordinates List and enter 5 1 0. Click Apply. b c a Step 2. Create Geometry of the Plate (Cont.) Select Smooth Shade and Iso 3 View. Change back to Wireframe and Front view. a a b b Step 3. Meshing with Quad4 Elements Elements: Create / Mesh / Surface Select Elem Shape: Quad Mesher: IsoMe