CSC200电信号校准仪参考手册.pdf

Reference Manual Compact Signal Calibrator AMETEK JOFRA CSC200  Copyright 2005 AMETEK Denmark A/S 1. Introduction The Ametek Jofra CSC200 is designed to calibrate a wide range of thermocouple and RTD devices. It can source or measure up to 14 different thermocouple (TC) types (including millivolts) and up to 17 RTD types (including ohms). A unique digital knob along with selectable decade controls allows quick and easy adjustment of the desired output. The user can also store up to 3 setpoints for any output range for quick recall. Setpoints are stored in non-volatile memory and will remain until new setpoints are stored. 1.1 Contacting Ametek US, Canada, Latin America AMETEK TCI at 1-800-527-9999 Europe, Africa, Middle East AMETEK Denmark A/S at + 45 4816 8000 Asia AMETEK Singapore Pte. Ltd. at + 65 (64) 842 388 1.2 Standard Equipment Inspect the unit carefully upon receipt. Save packing carton in case re- shipment is necessary. If there appears to be any damage, equipment missing or if there are any questions about the unit, contact AMETEK. Check to see if your calibrator is complete. It should include: • CSC200 Calibrator • Instruction Manual • Test Leads • Carrying Case 1 1.3 Safety information Symbols Used The following table lists the International Electrical Symbols. Some or all of these symbols may be used on the instrument or in this manual. Symbol Description AC (Alternating Current) AC-DC Battery CE Complies with European Union Directives DC Double Insulated Electric Shock