第二章 [计算机.思科网络技术学院CCNA中英文教程Exploration.配套eagle.server实验光盘].Eagle_Server_Intro.pptVIP

Eagle Server Setup: Running from CD Ensure PC is set to boot from the CD-ROM first. Change BIOS settings if necessary. Place the Eagle Server CD into the tray of the PC. Restart the PC. At the Exploration Server prompt, press ENTER to boot. After the drivers and settings are loaded, select option 1” to run the Linux software program from the CD and RAM. Eagle server software has a pre-configured IP address of 54. Eagle Server Setup: Dedicated Server Create and format a 4 GB FAT file system partition (not NTFS) on a MS Window PC hard drive. Reboot from the Eagle Server CD. At the opening screen press ENTER . This will load the Linux kernel. Type menu option installonFAT. Follow the instructions that are displayed. The installation will take approximately 15 minutes, depending on the speed of the CD. Leave the CD in the tray, required to access the server partition when the computer is rebooted. When the server is rebooted, press ENTER and type menu option runondisk. Eagle Server Setup: VMware from Image Download and install the latest version of WMWare Player from URL: /download/player/ Download Eagle-Server-version.rar Open the file in Winrar or Winzip, and drag the Eagle-Server folder to the computer’s desktop Double-click on folder Eagle-Server Double-click on the VMWare configuration file, Eagle_Server.vmx This will start Eagle Server inside VMWare. Note: Changes will not be persistent because the VMWare image is in ISO format. Eagle Server Name Service Eagle Server primary network is /24 on eth0 NAME IP ADDRESS 54 r1-isp 53 r2-central 54 s1-central * * * * etc, to * * provided the student lab computer is configured for this IP Address Web Server Name Resolution TFTP Configurations Eagle Server is TFTP enabled. Instructors can use Eagle Server to backup IOS images or IOS configuration files for students to download to Cisco devices