基于MSP430的瞬态高温传感器设计Design of transient high.PDF

2011 年 2 月 电 子 测 试 Feb.2011 第 2 期 ELECTRONIC TEST No.2 基于MSP430的瞬态高温传感器设计 李伟，郝晓剑，周汉昌 (中北大学 电子测试技术国家重点实验室，山西 太原 030051) 摘要：介绍了一种将接触式和非接触式相结合的蓝宝石光纤黑体腔瞬态高温传感器。测试系统由蓝宝石光纤 传感器、窄带滤光片、光电探测器、信号处理模块、MSP430、数据存储及处理软件组成，并从黑体腔形成和 微光信号探测方面进行了分析。利用MSP430的控制能力实现智能化，并采用了USB接口与计算机通信。实验 表明黑体腔在高温下具有稳定的性能，能够满足高温下的恶劣环境需求。该设计具有超低功耗、体积小、和 设计简便等优点，应用范围更广泛。 关键词：蓝宝石光纤传感器；瞬态高温测量；黑体腔；MSP430 中图分类号：TP212.1 文献标识码 ：A Design of transient high temperature sensor on MSP430 Li Wei, Hao Xiaojian, Zhou Hanchang (National Key Laboratory for Electronic Measurement Technology, North University of China,Taiyuan 030051,China) Abstract :The sapphire fiber blackbody cavity transient high temperature sensor is described based on contact and contactless integrated.The measuring system consists of sapphire fiber sensor ,narrow bandpass filter , photodetector ,signal processing module,MSP430, data storage and software ,and analyzes blank-body cavity production and weak photoelectricit signal detection. The control ability of the MSP430 is used to realize intelligentized and USB bus is used to communicate with computer .The experimental results show that the blackbody cavity has stable performance at a high temperature and meet the harsh environment. The system has these merits such as simple hardware ,smaller size and lower power consumption ,so it as value of spread and application. Keywords:sapphire fiber sensor;transient temperature measurement; black-body cavity;MSP430 90 测试工具与解决方案