液压机构断路器打压信号监测及报警系统-电气技术.pdf

液压机构断路器打压信号监测及报警系统 陈 亮 廖和福 邹文龙 李本毓 （中国南方电网超高压输电公司曲靖局，云南曲靖 655000 ） 摘要 液压机构断路器频繁打压是断路器机构故障中最常见的一种。常规的液压机构打压监 测方式采用现场抄录机构计数器读数、综合时间及断路器分合次数来判断机构打压是否异常，这 种方式既不准确也不及时。为了解决实时监控已建工程中机构打压的问题，本文研究了利用ZigBee 无线传输技术实现机构打压次数自动上传并报警功能的可行性，并通过试验证明此方案在短距离、 无遮挡环境是可行的。在已建工程中利用无线传输技术传输信号，避免了重新敷设电缆的麻烦， 同时不对现有系统造成影响。 关键词：液压机构；断路器；打压；异常；报警 Hydraulic Mechanism to Suppress Signal Monitoring and Alarm System Chen Liang Liao Hefu Zou Wenlong Li Benyu (Qu Jing Bureau, CSG EHV Power Transmission Company, Qujing, Yunnan 655000) Abstract It is a most common phenomenon of the circuit breaker hydraulic operating mechanism charging-pressure frequently. General supervising method for mechanism is to copy the reading of counter and to estimate whether the mechanism is abnormal though time and charging pressure time for the circuit breaker close and open. This method is not accurate either in-time. In order to solve the problems of supervising mechanism charging pressure status in constructed project in real-time, the thesis researches the feasibility of realizing automatic uploading of charging-pressure times and alarm function through ZigBee wireless transmission technology. The experiment proves that the program is feasible in short-distance and non-blocked environment. Wireless transmission technology can be used to transmit signal in constructed project, which may avoid the trouble of re-cabling, without affecting current sys-tem. Keywords ：hydraulic mechanism; circuit breaker; charging-pressure; abnormal; alarm 液压弹簧机构由油泵压缩弹簧储能，相较于液 1 液压碟簧机构断路器简介 压气动机构，其结构更紧凑，能量密度更大，安全 性和可靠性也更高。液压机构电动机打压是否正常