汽车空调涡旋压缩机的阶梯型齿形结构分析参考.pdfVIP

第37卷第1期 制 冷 技 术 Vol.37, No.1 2017年2月 Chinese Journal of Refrigeration Technology Feb. 2017 doi：10.3969/j.issn.2095-4468.2017.01.203 汽车空调涡旋压缩机的阶梯型齿形结构分析 *1 2 2 2 杜涛 ，孟晓磊 ，李晨凯 ，唐景春 （1-安徽东风机电科技股份有限公司，安徽合肥 230601 ； 2-合肥工业大学机械与汽车工程学院，安徽合肥 230009 ） [摘 要] 为了减少在不均匀气体温度场及压力场耦合作用下汽车空调涡旋压缩机涡旋盘断齿故障的发生， 本文采用不对称圆弧加直线的齿形修正方法，建立了阶梯型涡旋盘三维几何模型。基于ANSYS 有限元分 析软件，对比分析了几何排量86 ml 的阶梯型与常规型涡旋盘结构应力分布的情况。仿真及性能实验结果 表明，在气体温度及压力载荷共同作用下，阶梯型涡旋盘的应力集中区域出现在涡旋齿起始端上部，阶梯 型结构设计不仅可以降低断齿故障的发生概率，还可以提高涡旋压缩机的等熵效率。 [关键词] 汽车空调；涡旋压缩机；齿形修正；阶梯型结构；热应力仿真 Analysis on Ladder Typological Wraps Structure of Scroll Compressor for Vehicle Air Conditioner *1 2 2 2 DU Tao , MENG Xiaolei , LI Chenkai , TANG Jingchun (1- Anhui Dongfeng Mechanical and Electrical Technology Company Limited, Hefei, Anhui 230601, China; 2- School of Machinery and Automobile Engineering, Hefei University of Technology, Hefei, Anhui 230009, China) [Abstract] In order to reduce scroll wraps fracture failure of the scroll compressor for vehicle air conditioner in the non-uniform temperature and pressure field of refrigerant gas, the modified wraps approach has been completed by the combination asymmetric arc and line. The three-dimensional geometric model of ladder type scroll has been designed subsequently. Based on the finite element analysis software ANSYS, the structure stress distribution of the ladder type has been analyzed and compared with th