对比常见粉尘仪并介绍一种新型颗粒物分析仪-北京德菲世纪仪表有限.PDF

对比常见粉尘仪测量技术 并介绍一种新型抽取式烟道气颗粒物浓度分析仪 王 冲 （德菲电气（北京）有限公司，北京 100085 ） 摘要： 烟气中的颗粒物是由燃烧过程产生的，其粒径和数量取决于燃料和工艺过程。由于公众 对细微颗粒物对健康影响的关注，使大型燃煤电厂率先向近零排放的指标迈进。这对固 定污染源颗粒物排放连续监测系统PM-CEMS提出了更高的要求。本文比较了目前比较常 见的在线粉尘测量仪。并针对细微颗粒物超低量程、高湿烟气的工况，着重介绍一款新 型的抽取式颗粒物分析系统，其核心传感器基于扩散荷电复合离子阱/法拉第杯静电计， 这种系统可以在线连续测量，无需收集颗粒物。 关键词： 颗粒物，超细颗粒物，颗粒物排放连续监测系统，扩散荷电，离子阱，静电计。 Comparing Commercial Dust Monitors for Exhaust Gases and introducing a new Technology of Particulate Content Monitoring Wang Chong （Delta-phase Electronics (Beijing) Inc., Beijing 100085, China) Abstract: Particulate matter (PM) entrained in flue gases is produced by the combustion of fuels or wastes. The size and quantity of particles released depends on the type of fuel and the design of the plant . The concern about the health effect of the exposure to fine particles has led to the pioneer of near-zero emission of stacks in big coal -fired power stations. It requests the Continuous particulate emissions monitoring equipment ( PM-CEMS) to be installed to fit extreme low concentration of small particles in wet stack gases. This study provides an overview of the main types of monitoring systems and a comparative analysis of the currently available technologies for measuring dust releases to atmosphere. The PPS-M sensor is an electrical aerosol sensor based on diffusion charging and Ion-trap/Faraday-cup current measurement without particle collection. We will introduce a new extractive PM-CEMS with the core sensor. Keywords: particulate matter; Fine PM; PM-CEMS; Diffusion Charging; Ion-trap; Electrometer.