钻井新工艺新技术高级培训-03 长城钻探工厂化作业经验交流.pptVIP

* * * * * According to GWDC practice in the field, one of the solutions is well factory operation. Yes, that is well factory drilling, fracturing, production, etc. As my presentation in the beginning, the success of UCR depends on the … * Up to now, we had carried out the well factory operation in different area, different size of the pad. Such as 6-well-pad, 9-well-pad, 13 well-pad. Now I will go deep for each pad. First, 6-well-pad for shale gas project at Wei 204 202. We provide the 8 rigs at 4 pads. The fracture operation will start in the coming January. Expected productivity is 14 billion cubic feet shale gas per year after 64 wells drilled. * For 6-well-pad, the 6 wells wellhead divided into 2 rows, each row 3 wells. Consideration on the cost, the water based mud is used in the vertical section (phase 1 and phase 2), the OBM is used in the horizontal section (phase 3). Therefore, all the wells in phase 1 and phase 2 to be drilled together, after that, displace the WBM with OBM, continue all the well phase 3 drilling. Let me show you the batch drilling in this chart. * The Advantages of this well factory operation mode is: Skid-mounted rig, moving the rig without laying down DP and DC, to save the rig move time; Dual rig operation at the same time, to reduce the whole pad construction time; Batch drilling, easy to take lessons learned for each phase drilling, drilling performance improved well by well; Avoiding the replacement of WBM and OBM in each well; easy to deal with OBM and it’s waste handling, meanwhile, reducing the OBM consumption; Cost saving and time saving. * * The third, integrated technology requires the sound project management, to take the precaution actions to meet the clients schedule, quality and cost. This chart is to show that we monitor the each rig performance daily for shale gas project, take lessons learned, and share the good practice among the different rig crew. * Secondly 9 well pad, the 9 well located in one row. For tight