预制剪力墙中墩头钢筋预留孔灌浆连接锚固性能 - 中国管理科学.pdf

第43卷 第4期 北 京 工 业 大 学 学 报 Vol.43 No.4 2017年 4月 JOURNAL OF BEIJING UNIVERSITY OFTECHNOLOGY Apr. 2017 预制剪力墙中墩头钢筋预留孔灌浆连接锚固性能 刘程炜,曹万林,秦成杰,王世蒙 (北京工业大学城市与工程安全减灾教育部重点实验室,北京摇 100124) 摘摇 要:为研究预制混凝土剪力墙结构中的墩头钢筋预留孔灌浆连接的锚固性能,考虑混凝土强度、再生混凝土粗 骨料取代率、钢筋直径、锚固长度、预留孔直径等参数,制作了27个预制混凝土墩头钢筋预留孔灌浆连接拉拔试件 和24个预制混凝土直钢筋预留孔灌浆连接拉拔试件. 拉拔试验结果表明:带墩头钢筋在高强灌浆料中锚固150 mm时,其极限黏结强度为直钢筋与灌浆料黏结强度的1郾8倍以上,建议此种墩头钢筋锚固长度取为0郾6l ;高强灌 ab 浆料与普通混凝土、再生混凝土预留孔孔壁的黏结性能良好,预制剪力墙中的预留孔直径可选择50mm. 关键词:预制剪力墙;墩头钢筋;钢筋锚固;灌浆料 中图分类号:TU375郾4 文献标志码:A 文章编号:0254-0037(2017)04-0594-06 doi:10.11936/ bjutxb2016060013 Anchorage Performance of Button鄄head Steel Bars in Grouted Reserved Holes in the Precast Shear Wall LIU Chengwei,CAO Wanlin,QIN Chengjie,WANG Shimeng (Key Laboratory of Urban Security and Disaster Engineering (Beijing University of Technology), Ministry of Education,Beijing,100124,China) Abstract:To study the anchorage performance of button鄄head steel bars in grouted reserved holes in the precast shear wall, pull鄄out test of 27 specimens with button鄄head steel bar and 24 specimens with straight steel bar were carried out. Concrete strength, recycled concrete, reinforced bar diameter, anchorage length,and reservedhole diameterwere considered asthe mainfactors. Test resultsshow that when button鄄head steel bar anchors 150mm in high strength grouting material,itsultimate bond strength reaches more than 1郾8 times of straight steel bar. Anchorage length of this button鄄head steel bar is suggested as 0郾6l ; high strength grouting material has good b