砷滤饼制备砷酸铜的影响因素及工艺优化.pdfVIP

  • 8
  • 0
  • 约1.18万字
  • 约 4页
  • 2017-07-13 发布于未知
  • 举报

砷滤饼制备砷酸铜的影响因素及工艺优化.pdf

第 39卷 第 2期 兰 州 理 工 大 学 学 ‘报 VoI.39 N0.2 2013年 4月 JournalofLanzhouUniversityofTechnology Apr.2013 文章编号:1673-5196(2013)02-0005434 砷滤饼制备砷酸铜的影响因素及工艺优化 王玉棉 ,徐 瑞 ,赵忠兴 ,孙建国 (1.兰州理工大学材料科学与工程学院,甘肃兰州 730050;2.兰州理工大学 甘肃省有色金属新材料重点实验室,甘肃 兰州 730050) 摘要:采用氢氧化钠溶液浸出硫化砷滤饼,有效实现As与Cu和Bi等金属的分离,对浸出液经氧化脱硫后配入黑 铜泥的酸性浸出液制备砷酸铜.研究结果表明:当NaOH的浓度为 1.5mol/L、液固比10:1、反应温度7O℃、反应 时间1.5h、搅拌速度为400r/rain时,硫化砷滤饼中As的漫出率达到96.56 ,Cu浸出率仅为0.12 ;经氢氧化 钠浸出,漫出渣中Cu、Bi的质量分数分别从原来 15.93 和 1.96 增加到56.31%和6.92 ,使Cu和Bi得到高度 富集;所制备的砷酸铜w(Cu)29.8 , (As)26.19 ,砷酸铜的结构式为Cu5Ast015·9H2O.. 关键词:硫化砷滤饼;氢氧化钠;浸出;砷酸铜 中图分类号:TF111.3 文献标识码:A Influencingfactorofpreparationofarsenateofcopperfrom arsenicfiltrationcakeanditsprepara tionprocess WANGYu-mian ,XU Rui,ZHAOZhong-xing,SUNJian-guo (1ICollegeofMaterialsScienceandEngineering,LanzhouUniv.ofTeek ,I~rLzhou,730050,China;2.StateKeyLaboratoryofGansuAd— vaDcedNonferrousMetalMaterials,I丑nzhouUniv.ofTech.,Lanzhou 730050,China) Abstract:InordertoseparateAsfrom metalsuchasCuandBieffectively,filtrationcakeofarsenicsul— fidewasleachedOUtinsodium hydroxidesolution.Arsenateofcopperwaspreparedbymeansofadding acidleachingsolutionofblackcoppersludgesintoleachingsolutionafteroxidativedesulfurization.The investigationresultshowedthatthelcachingrateofarsenicinthefiltrationcakeamountedto96.56 and theleachingrateofcopperwasonly0.12 whentheconcentrationofsodium hydroxidesolutionwas1.5 mol/I,theratioofliquidtosolidwas10:1,thereactiontemperaturewas70℃,thereactiontimewas 1.5h,andthestirringspeedwas400r/min.After1eachedbysodium hydroxidesolution,themassfrac— tionofCuandBiinlcachedresiduewouldincreaserespectivelyfrom 15.93 and1.96 to56.31 and 6.92 ,CuandBiwerehighlyenriched.ThecontentofCuandAsinpreparedarsenateofcopperwouldbe morethan29.8 and26.1996/respectively,thestructureofarsenateofcopperwouldbeCusAs4O15·9H2Q

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档