VW 10540 汽车零部件供应商代码 2011 07 01.pdfVIP

Group Standard VW 10540-1 Issue 2011-07 Class. No.: 01155 Descriptors: manufacturer, code, marking, vehicle part, damage analysis, warranty Manufacturers Code for Vehicle Parts Previous issues VW 10540-1: 1972-10, 1999-06, 2005-06, 2006-06 Changes The following changes have been made compared with VW 10540-1: 2006-06: – Section 1: links to list of manufacturers codes and B2B platform updated, and notification of manufacturer changed, was: ...notification by letter. 1 Scope Vehicle parts and function groups that are – purchased as ready-to-install parts from suppliers, – partially supplied by suppliers, – taken from current production as original or accessory part or – manufactured in-house as original or accessory part must be marked with a permanent and easily legible three-character manufacturers code (alpha‐ betical or alphanumerical). Marking with the manufacturers code is required so that selective damage and quality analysis can be carried out if necessary and so that the manufacturer can always be identified in warranty and product liability cases. Manufacturers codes are established for all manufacturers and their individual production locations that supply vehicle parts to the Volkswagen Group and its brands, including its subsidiaries/associate companies. Verify that you have the latest issue of the Standard before relying on it. Page 1 of 4 This electronically generated Standard is authentic and valid without signature. The English translation is believed to be accurate. In case of discrepancies, the German version is alone authoritative and controlling. Numerical notation acc. to ISO convention. Technical responsibil