ABS电器盖 塑料模具课程设计（Course design of plastic mould for ABS electric cap）.docVIP

ABS电器盖 塑料模具课程设计（Course design of plastic mould for ABS electric cap） ABS electric cap plastic mold course design.Txt you stand there, do not move! Wait till I run! The rain fine woman you slowly sweep houses I for you to sweep the world you heard my marriage is now very cheap, 9 dollars to fix the Civil Affairs Bureau, I ask you, you idiot. This happen to stand behind me! Follow me. One day your name will appear on my home account. This paper consists of new contribution FengChiTianXia DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Plastic mold design case ABS electric cap Technical requirements: 1, no trace of appearance, surface roughness Ra3.2; 2, no note chamfer R0.5, no note dimensional tolerance, take MT5 level accuracy; 3, mass production. I. technical analysis of plastic parts 1. use performance, parts, technical requirements and production requirements, the use of performance, the plastic parts for the cover, for dust. According to the requirements, the use of mass production, using injection molding. 2.. Understanding plastic parts ABS is a thermoplastic amorphous material, medium liquidity, overflow value of about 0.04 mm, moisture absorption strong, before molding must be fully dry. 3. dimensional analysis of plastic parts look-up table (3 - 1) 400 +0.05 [2] [1] And tables (3 - 2) [2] know 250. +0.05 All of them are class MT2 precision, which belong to high precision size in mould design and manufacture Ensure accuracy requirements. The other sizes have no special requirements, and their dimensional tolerances shall be checked by MT5 level accuracy. 4. the quality of the plastic surface analysis must avoid burrs in plastic parts of the surface; pay attention to the hole does not appear sharp edges; the surface roughness only shape requirements Ra3.2, no other parts of high roughness requirements. Analysis of 5. plastic parts of the structure process (