2-3.底材处理（2-3. Substrate treatment）.docVIP

2-3.底材处理（2-3. Substrate treatment） 2-3. Substrate treatment This article is contributed by BCSXIE Substrate treatment We mentioned Any paint job depends largely on the quality of the substrate processing. Auto repair industry is no exception. For material handling auto repair industry is no exception To earn a good film adhesion and surface quality, well before the film adhesion and surface quality of paint Line substrate processing. Must follow the correct procedure carefully line substrate processing 2011/5/4 one Substrate treatment We mentioned ? Wash the surface of the dust with warm soapy water first, then rinse the surface with warm soapy water. Rinse and dry. Rinse and dry. With clear degrease cleaner (D837) to repair parts and adjacent with clear degrease cleaner (D837) to repair parts and adjacent (D837) surface, remove grease on the surface of the surface, the removal of surface oil, wax or other residue containing silicon material.? Determine the type of repair surface and the thickness of the paint film and the degree of repair. 2011/5/4 2 Substrate treatment We mentioned Only when the work finished, only when the work is finished To concrete repair work. PPG provides various types of high quality surface treatment products to adapt to provide various types of, provides various types of different repair needs. Different repair need to use these products can significantly improve the quality of paint, reduce the cost of the save Labour when the province Time, reduce the cost. Todays automotive industry USES the variety of substrate, todays auto industry by a wide variety of substrate And each material end need to have special treatment 2011/5/4 3 Substrate treatment The type of steel aluminum other metal - copper, cast iron organic coating - paint film plastic 2011/5/4 Glass reinforced plastic wood glass concrete 4 Base type How many different types of substrates are there in this car? 2011/5/4 5 Substrate treatment steel 1. The rust on the surface of hig