吊顶施工（Condole carries on the construction）.doc

吊顶施工（Condole carries on the construction） Top lift 6.1 general provisions 6.1.1 this chapter applies to the quality acceptance of the divisional works such as the ceiling of the dark keel and the suspension of the Ming longbones. Description: 6.1.1 this chapter is applicable to the ceiling project of the keel and decoration panel. According to the construction technology, it is also divided into the ceiling of the keel and the ceiling of the Ming long bone. 6.1.2 the following documents and records shall be checked for the acceptance of the ceiling project: 1. Construction drawings, design instructions and other design documents of the ceiling project. 2. Product qualification certificate, performance test report, entry and acceptance record and reinspection report. 3. Concealed work acceptance record. Construction record. 6.1.3 the ceiling project shall be reinspected by the formaldehyde content of the man-made board. 6.1.4 suspension engineering shall be subject to acceptance of the following concealed works projects: 1. Installation of pipe and equipment in ceiling, installation of equipment and water pipe test. 2. Wooden keel fire protection and anti-corrosion treatment. Embedded parts or tendons. 4 boom installation. 5 keel installation. 6 fill the material Settings. Description: 6.1.4 in order to not only ensure the use safety of condole top project, and achieve the completion inspection and acceptance does not destroy finishes, ceiling engineering concealed engineering acceptance is very important, set forth in this article listed shall provide for the concealed engineering acceptance certificate signed by supervision engineer. 6.1.5 the inspection approval of each sub-item shall be divided according to the following provisions: The same variety of ceiling works shall be divided into one inspection batch per 50 (large area rooms and corridors with a ceiling area of 30m2), and less than 50 shall be divided into one inspection batch. 6.1.6 inspection quantity