哈尔滨桥塌（Harbin bridge collapse）.doc

哈尔滨桥塌（Harbin bridge collapse） Uninsurable bridge design brings danger to the bridge There is a high probability that the accident will be connected According to the central peoples broadcasting station reported, Harbin industrial university space steel structure curtain wall co., LTD., President, Dr. Chen Yueming engaged in steel structure design and construction for many years, after carefully watch the scene of the accident, there is a reason for the accident may be joint rivet head was not enough. In the investigation of the accident, the traffic control department of Harbin city security, transportation and public security has ordered the overturned vehicles to be ranked from north to south, respectively, from 1 to 4. According to the survey, no. 1 truck will weigh 22 tons, and the total weight of the trucks from 2 to 4 will be more than 400 tons, and the volume of the two and four cars will be changed to non-standard vehicles. Bridge while overload operation of cars, more than four hundred tons of weight car sounds amazing, but for the whole bridge of self-respect, under normal circumstances even considering the effect of shear stress, the load on the trigger an entire block of the bridge side should be negligible. The collapse of the bridge, which is close to the bridge of the accident, indicates that the total connection project of the bridge is not completed, which should be a whole bridge and is divided into several paragraphs. The collapse of the bridge is independent and the adjacent bridge cannot share the torque stress, so the accident happens. [details] Harbin group bridge accident scene. The combination of the seismic support of the bridge and the single-column design, the security risks have been greatly increased According to Dr Chen, the sliding deck is like a bench with only two legs, and the supporting point is on the middle of the bench. The design of bridge connections and support is likely to be flawed, but it is not enough to cause it to fal