技术小题（Technology item）.docVIP

技术小题（Technology item） 1. The order and method of earthwork excavation shall be consistent with the design conditions, and which principles shall be followed? A: the principle of slotting support, digging first, digging in layering, and strictly cutting out. 2. Which items should be inspected during construction of concrete grouting pile? A: the whole process of the construction shall be inspected through the process of perforation, slag removal, reinforcing cage and pouring concrete. 3. The placing of concrete test block for grouting pile? Answer: each pour 50M3 must have 1 set of test pieces, less than 50 M3 pile, each pile must have 1 set of specimens. The base design grade of the foundation is a class a or the geological condition is complex, and the pile quality is low and reliable, which test method should be used to test the carrying capacity? Answer: the method of static load test should be carried out. 5 pair of concrete beams and plates with a span of not less than 4 m, and the supporting mold of the steel bar, when the design has no specific requirements, what is the superarch height? Answer: 1/1000-3/1000 of the span. How do you keep the wall when its near the beam and the bottom of the board? Answer: the gap between the filling wall and the load-bearing main structure should be carried out after the wall is built in 14d. 7. What should be the strength of concrete when the bottom die of the cantilever component is removed? Answer: should achieve 100 % of design concrete standard value to tear down. 8. The subdivision of concrete subdivision is divided into several sub-projects. Answer: template, reinforcement, prestressed, concrete, cast-in-place structure and assembly structure. 9. How many degrees should be the Angle of bending Angle for the structure of the required structure, such as seismic resistance? What is the flat length? A: it should be 1350 and the flat length is 10 times the diameter of the steel bar. 10. Simple calculation formula of steel w