更改说明（To change that）.docVIP

更改说明（To change that） 2006-12-22: use the numeration method to judge the train to pass, abandon the card counter 2006-12-23 the car failed 2006-12-28: the train has been delayed to 10s 2006-12-29: use the XML configuration file to read and write, and modify the failure function on the car 2007-01-03: modify the search for the maximum function 2007-01-04: revise the roll-slip judgment function and adjust the position of the variable 01-09: modify the IO card function, about clearIRQ 2007-01-16: add function declaration, increase the problem of repeated problem solving in the process of AD card. 2007-05-17: change the overall collection mode. The original practice response becomes the message passing. 2007-05-28: automatically generate folders. 05-28: adjust the upper and lower line symbols and replace up/down with array [0] [1]. 2007-05-31: add debug window for debug output. 2007-08-07: adjust the display mode, and do not display repeated point information when crossing the car. 2007-08-07: fixed disk path problem in the photon calibration curve. 2007-08-08: storage waveform BUFF expands from 15MB to 32MB, processing waveform BUFF, from 2048 to 100,000. Prevent the magnetic steel interference from producing the wrong waveform. 2007-08-08: increases the handling of abnormal vehicles (total axis number 0) and forms an error mark in the vehicle data. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 2008-01-07: the decision to protect the door switch is changed to four, and the interface increases the display of the thermal target temperature. 2008-01-20: adjust the judgment of magnetic steel waveform and increase fault tolerance. 2008-02-14: increase