汽车手册4（Car manual 4）.doc

汽车手册4（Car manual 4）Try to wash the oil pump and oil filter, clean and check the cylinder wall, check the bearing shell (when necessary), put the oil pan and fastening, filling reserved by the regulation of new engine oil to the oil level.(6) check the work condition of air compressor and the sealing of the pipe, adjust the tightness of the belt, eliminate the oil and water and dirt in the storage, and check the wiper and its airway.(7) check the fixed conditions of the radiator and cover, the water pump working condition, the water leakage, the pump shaft and grease, check the work efficiency of the shutter.Ii. Clutch and transmission parts:(1) check the clutch efficiency and the base bolt, adjust the free travel of the springboard, and add grease to the springboard shaft. (2) check the transmission gear oil, cleaning the gearbox, gear, check the wear of gear, shaft, and gear mechanisms and flywheel shell bolt fastening, refitted transmission cover, gear oil filling reserved to height.(3) check the wanxiang section, according to the situation to switch the direction of the 10-axis axis, check the loose and open conditions of the transmission shaft and telescopic sleeve, check the middle support bracket and the bearing, add the grease, and tighten the towing nut.(4)