混凝土变形裂缝的成因及防范措施（Causes and preventive measures of concrete deformation cracks）.docVIP

混凝土变形裂缝的成因及防范措施（Causes and preventive measures of concrete deformation cracks） Causes and preventive measures of concrete deformation cracks Abstract: concrete is one of the most commonly used materials in engineering construction. The durability of concrete affects directly The life of concrete and its use cost, and the deformation crack is an important factor that affects the durability of concrete. In this paper, The reasons for the fracture of the large-sized concrete and the high strength concrete are put forward and the preventive measures and the anti-cracking concrete are put forward Development direction. Key words: concrete deformation crack formation prevention measures Concrete crack is a long - term disturbance to the construction engineering treatment measures to do some research. In spite of all the measures taken in the construction, Cracks still exist. Concrete cracks are mainly divided into sany and concrete deformation cracks Class: a class is caused by load (including construction and use of order 1, temperature change The static load and dynamic load of a section are caused by the change of temperature The class is formed by deformation (including temperature, humidity distortion, not form, expansion or contraction). This is the physical characteristic of the material The fracture caused by uniform settlement, chemical reaction, etc. When this volume change is restrained, it is produced The other type is due to construction operation (such as production, ejection, internal stress, when the resulting concrete inside) When the tensile stress caused by maintenance, stacking and transportation of hoisting vehicles exceeds the limit of tensile strength of concrete, mix Seam. In this case, there is a temperature crack in the formation of the concrete deformation and the formation of the concrete. For example, mass coagulation Wen/Chen hongan After soil is cast, concrete is produced during hardening With a large amount of hydration heat and internal te