煤矿矿山（Coal mine）.docVIP

煤矿矿山（Coal mine） It has 2 coal-fired power plants, with a capacity of 300,000 kilowatts and annual generating capacity of 2.6 billion kilowatt-hours, which can be used for coal mines and other industrial and agricultural production. Construction materials such as brick, stone and cement can be supplied in place, and materials such as steel and timber can be transported directly to industrial sites by rail and road. Section 5 mine design and construction I. mine design situation * * * * * coal mine design and production capacity is 0.6 Mt/a. The preliminary design was designed by * commissioned coal industry hefei design institute. The mine has a total of 38.1 million tons of geological reserves, and the calculation of recoverable reserves is 2336.20 million tons, which is 0.6mt/a according to the annual production capacity of the mine design, and the reserve ratio of 1.3 is considered, and the mine service life is 30 years. In this field, the buried depth of the coal seam is very large, and the use of inclined well is larger and the investment is higher. Therefore, it is adopted to develop the shaft. In the shallow boundary of the well field, the coal seam has a high elevation of + 100m, and the construction well is designed to the middle of the well field. The coal seam is about -100m, and the coal seam is about 7 o, which is to slow down the coal seam. Tilt length 1500 ~ 2000m. According to the above characteristics, this well field can be divided into a horizontal development. A new main well and a secondary well are built in 340m, east of the 25 prospecting line and 340m in northeast of the drilling line, and the well head is high + 329.5 m. According to the location of the wellhead and the development of the well field, the final level elevation is -116m, according to the actual disclosure of the construction. The coal seam in the whole well is divided into 11, 12 and 13 mining areas. The first mining area (central mining area) is 11 mining area, the western mi