环境和快捷航空（Environment and fast airlines）.docVIP

环境和快捷航空（Environment and fast airlines） Send = 0.35 kN/m2 ; Offers -- Wind load height variation coefficient, according to the construction load specification (GB50009-2001) The rules adopted: Offers = 1.82 ; Us -- Wind load type coefficient: value is 0.58 ; The standard value of wind load is obtained by calculation Wk = a 0.7 x 0.35 x 1.82 x 0.58 = 0.26 kN/m2 ; When wind load is not considered , Calculation formula of axial pressure design of vertical rod N = 1.2 NG NQ = 1.2 + 1.4 x 4.31 + 1.4 x 5.18 = 12.42 kN ; Consider the wind load , The axial pressure design value of vertical rod is N = 1.2 NG + 0.85 x 1.4 NQ = 1.2 x 4.31 + 0.85 x 1.4 x 5.18 = 11.33 kN ; The bending moment of the vertical bar produced by the design of wind load Mw for Mw = 0.85 x 1.4 WkLah2/10 = 0.85 x 1.4 x 0.26 x 1.5 x 1.82/10 = 0.15 kN. M ;  The stability of the pole is calculated : 1. When the wind load is not considered, the stability calculation formula of the vertical rod is: The shaft of the vertical bar is designed for the pressure : N = 12.42 kN ; I - - - Calculate the radius of rotation of the vertical bar (cm) ; I = 1.59 cm A - - - Vertical bar net area (cm2) ; A = 4.5 cm2 phi -- -- -- The stability coefficient of the axial compression lever , By the slenderness ratio L0 / I The lookup table is obtained; sigma -- -- -- Calculation value of compressive strength of steel tube upright rod (N/was) ; [f] -- - Design value of the compressive strength of steel tube upright rod, [f] = 205.00 N/was ; L0 - Calculate the length of the (m) ; If the safety technical specification for construction construction buckle type steel pipe is fully referenced by the formula (1) To calculate (1) L0 = k1uh K1 - Calculate the length of the additional coefficient and evaluate it K1 = 1.16 ; U - Calculate the length coefficient, With reference to Safety technical specifications for steel pipe scaffolding for construction construction table 5.3.3 , U = 1.50 ; The formula (1) Calculation results: L0 = 1.16 x