电工面试试题（Electrician interview）.docVIP

电工面试试题（Electrician interview） How does an electrician operate in a charged overhaul? Answer: (1) the electric worker should wear long sleeve top and trousers, buckle cuff cuff, prohibit wearing vest, shorts, slippers to do homework. Electric work must be worn with insulating boots, safety caps and insulated gloves, on insulation pads, with tools with insulated handles. It is forbidden to measure with steel tape or leather tape with wire. (2) charged operation personnel should be trained and qualified examination, and skilled grasp of charged operation technology, at the same time shall be charged operating practice experience of personnel supervision. (3) in the work to ensure that the human body with the earth, between the human body with the surrounding ground between metal, the human body and other phase conductor (including zero) have good insulation or proper safety distance. (4), the body must not contact with two wire at the same time, in order to avoid electric shock. To do this, single - hand single-line operation is possible. (5) the working time of the live maintenance should not be too long, so as to avoid the accident caused by fatigue caused by fatigue. 2. What measures should be taken to prevent the electric shock from electric shock? A: (1) the contact voltage applied to the human body is exerted on the ground potential. Therefore, the electrical equipment enclosure grounding and protection by zero, electrical equipment, more repeated earthing and neutral earthing and high subsection to homework, etc., are to eliminate the human body of work after the voltage. (1) increase the impedance of the electrical circuit in the human body to minimize the current through the human body. Such measures are effective in ensuring the safety of personnel, such as using insulation, insulating pads and insulating gloves. (1) to prevent the personal electric shock, according to the actual work of the work and take effective and reliable on-site measures. Such as setti