电机拖动练习（Motor drag practice）.docVIP

电机拖动练习（Motor drag practice） 1. There are twenty minor questions, one for each question. 01. The excitation method of dc motor has, and. The method to change and excite the voltage polarity of the two ends of the dynamo armature should be adopted. The U Ea of dc motors is running in... 04. An airload potential of 230V for a dc generator, if it increases by 15%, the potential size will be _____________V. 05. Direct current (dc) during the size of the electromagnetic torque is proportional to the __________________ and..,. 6. The characteristics of the braking state is ___________________________________________, the effect of brake is __________________________________________________. 07. Separately excited dc motor excitation and load torque are unchanged, such as reducing the armature voltage, the armature current will _______, electromagnetic torque will _______, speed will be _________. 08. When the dc motor is running with load, if the load torque is increased, the motor speed will be __________. 09. He motivates the dc motor to drag the power of the constant torque load to run up at the rated speed. If the load is to be reduced, the rotation speed becomes negative, the method to be used is in the armature loop. . 10. A three-phase transformer rated voltage U1N/U2N = 220 k / 10 kv, Y/Δ - 11 connection, the change ratio of 11. A frequency of 50 hz transformer to run on 60 hz power into, other unchanged, the main magnetic flux change, no-load current. 12. In the three-phase ac asynchronous motor, the condition that the stator windings generate a rotating magnetic force after the power of the stator winding is ____________ _. And 13. Starting method adopts Y/Δ transformation, can lower the three-phase ac asynchronous motor. 14. The ac asynchronous motor energy consumption brake is to disconnect the ac and to add the two or three of the stator winding. 15. The synchronous rotational magnetic field of a three-phase ac asynchronous motor is 2, and its synchronous ro