电磁炉常见故障现象（Common failures of induction cooker）.docVIP

下载本文档

20
0
约2.44万字
约 24页
2017-07-15 发布于河南
举报
版权申诉

电磁炉常见故障现象（Common failures of induction cooker）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

电磁炉常见故障现象（Common failures of induction cooker）

电磁炉常见故障现象（Common failures of induction cooker） Common failures of induction cooker Maintenance methods for failure phenomena 1. Do not boot up (according to the power button indicator light is not on. (1) bad button (2) the power wiring is loose (3) the power cord is not energized (4) blown fuse (5) the power crystal IGBT is bad (6) resonance capacitance C103 is bad (7) the yini dipole (8) the transformer is broken and no 18V output (1) check and replace the key plate (2) reconnect (3) reconnect or replace (4) replacement (5) replace (6) replacement (7) check and replace it (8) check and replace (9) replacement 2. Set the pot, indicating the light is on, but not heating (1) the wire disk is not locked (2) stable diode ZD101 is bad (3) the baseboard components are bad (1) lock the wire disk (2) replace the stable diode ZD101 (3) change base board components 3. The lamp is not bright and the fan rotates. (1) improper insertion of LED slots (2) stable diode ZD2 (3) the baseboard components are bad (1) reconnecting or changing the LED board (2) replace the stable diode ZD2 (3) change base board components Heat up, but the indicator is not bright. (1) LED diode is broken (2) the LED substrate component is broken (1) change LED diode (2) change LED base board components 5. No pot, indicating light, not heating. (1) the thermal resistor wiring is loose or damaged (2) integrated block LM339 bad or integrated block TA8316 bad (3) the transformer is badly inserted (4) the substrate component is broken (1) reconnect or change thermistor components (2) replace LM339 or TA8316 (3) check or change master IC (4) change base board components 6. The power is unchanged (1) adjustable resistance (2) the heating/fixed temperature resistance is wrongly or short-circuited (3) the main control IC is bad (4) bad (1) change of the base plate component (2) check the heating/constant temperature resistance (3) check or change master IC (4) switch board or switch board components The buzzer is