电线选径（Choose wire diameter）.docVIP

电线选径（Choose wire diameter） The calculation of the flow of conductors 1. Purpose: the carrying capacity of various conductors (safe current) is usually available from the manual In the search. But with the use of the formula and a few simple mental arithmetic, you can directly calculate, do not need to check the table. Load of the conductor The flow is related to the carrying surface of the wire, also with the material of the conductor (aluminum or copper), type (insulated wire or bare wire, etc.), the laying party The method (in the case of Ming or tubule, etc.) and ambient temperature (25 degrees or greater) are related to more factors, calculation Its also more complicated. Ten five, one zero two. Two, five, three, five, four, three. 7, 0, 95, two and a half times. Tube temperature, 90% off. The bare wire is half. Copper wire upgrade calculation. 3. Description: the formula is a strip of aluminum insulated wire that is applied to the ambient temperature of 25 degrees A shall prevail. If the condition is different, the formula is otherwise stated. The insulation line includes various types of rubber insulated wire or plastic insulated wire. formula The load flow (current, ampere) of various sections is not pointed directly, but is used section. To do this, you should be familiar with the cross section, (square) permutation 1. 1.5, 5, 4, 6, 10, 16, 25, 35, 50, 50, 50, 50, 50, 50, 50, 50, 75, 50, 50, 50, 50, 50, 50, 50, The cut area of the insulated wire of the production plant usually starts at 2.5 and the copper core The insulated line starts at 1; The bare aluminum wire starts at 16; The bare copper wire starts at 10. The flow rate of the aluminum core-insulated wire can be calculated according to the number of sections. Formula of china-arab Rab digital represents wire cross section (square mm), and Chinese characters are multiple. Arrange the cross section of the formula Here it is: .. 10, 16-25, 35-50, 70-95 120... Five times four times three times three times